NMT-8 Series Lycra Water Based Ink
Soft touch, excellent elasticity, good adhesion, anti-scratch, steady color and anti-wash.
1、According with the environmental standard of Formaldehyde(Japan).
2、According with the standard of AZO(2002/61/EC).
3、According with the standard of EN-71 Part 3(Heavy Metal).
4、According with the standard of GB/T 7573(PH) for textile.
5、According with the standard of APEO(2003/53/EC).
White Printing Color Printing
NM-0401 0-10 70-90
NM-0401 90-100 10-30
Pigment - 1-8
Total (weight%) 100
Printing (1000-1200 mesh screen) -- Drying (60-70 ℃ for 3-5 mins) or hot treatment (150 ℃ for 2-3 mins)
1、It will has better soft touch if use 100%TD-100 as the underlayer first.
2、Add 1%WG-001 for excellent anti-wash and anti-scratch.You can add more 0.2%WG-001 if the ink can not be finished within 24 hours.
3、Please store the finished product after full dry to avoid the after tack.
4、Have a hot treatment after full dry can reduce the stickiness.
5、Wash the mesh fully when the mesh blocks up.
6、Add 5-8% pure water or 2-5%WG-004 as the thinner.
7、Please test before printing.
Storage at room temperature for 6 months. (0 > 40 ℃)
Start Your Order